dolphin/Source/Core/DSPCore/Src/DspIntMisc.cpp

190 lines
4.7 KiB
C++
Raw Normal View History

// Copyright (C) 2003 Dolphin Project.
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, version 2.0.
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License 2.0 for more details.
// A copy of the GPL 2.0 should have been included with the program.
// If not, see http://www.gnu.org/licenses/
// Official SVN repository and contact information can be found at
// http://code.google.com/p/dolphin-emu/
// Additional copyrights go to Duddie and Tratax (c) 2004
#include "DSPInterpreter.h"
#include "DSPCore.h"
#include "DSPIntUtil.h"
namespace DSPInterpreter {
// MRR $D, $S
// 0001 11dd ddds ssss
// Move value from register $S to register $D.
// todo: Perform additional operation depending on destination register.
void mrr(const UDSPInstruction opc)
{
u8 sreg = opc & 0x1f;
u8 dreg = (opc >> 5) & 0x1f;
u16 val = dsp_op_read_reg(sreg);
dsp_op_write_reg(dreg, val);
dsp_conditional_extend_accum(dreg);
}
// LRI $D, #I
// 0000 0000 100d dddd
// iiii iiii iiii iiii
// Load immediate value I to register $D.
//
// DSPSpy discovery: This, and possibly other instructions that load a
// register, has a different behaviour in S40 mode if loaded to AC0.M: The
// value gets sign extended to the whole accumulator! This does not happen in
// S16 mode.
void lri(const UDSPInstruction opc)
{
u8 reg = opc & DSP_REG_MASK;
u16 imm = dsp_fetch_code();
dsp_op_write_reg(reg, imm);
dsp_conditional_extend_accum(reg);
}
// LRIS $(0x18+D), #I
// 0000 1ddd iiii iiii
// Load immediate value I (8-bit sign extended) to accumulator register.
void lris(const UDSPInstruction opc)
{
u8 reg = ((opc >> 8) & 0x7) + DSP_REG_AXL0;
u16 imm = (s8)opc;
dsp_op_write_reg(reg, imm);
dsp_conditional_extend_accum(reg);
}
//----
// NX
// 1000 -000 xxxx xxxx
// No operation, but can be extended with extended opcode.
// This opcode is supposed to do nothing - it's used if you want to use
// an opcode extension but not do anything. At least according to duddie.
void nx(const UDSPInstruction opc)
{
zeroWriteBackLog();
}
//----
// DAR $arD
// 0000 0000 0000 01dd
// Decrement address register $arD.
void dar(const UDSPInstruction opc)
{
g_dsp.r.ar[opc & 0x3] = dsp_decrement_addr_reg(opc & 0x3);
}
// IAR $arD
// 0000 0000 0000 10dd
// Increment address register $arD.
void iar(const UDSPInstruction opc)
{
g_dsp.r.ar[opc & 0x3] = dsp_increment_addr_reg(opc & 0x3);
}
// SUBARN $arD
// 0000 0000 0000 11dd
// Subtract indexing register $ixD from an addressing register $arD.
// used only in IPL-NTSC ucode
void subarn(const UDSPInstruction opc)
{
u8 dreg = opc & 0x3;
g_dsp.r.ar[dreg] = dsp_decrease_addr_reg(dreg, (s16)g_dsp.r.ix[dreg]);
}
// ADDARN $arD, $ixS
// 0000 0000 0001 ssdd
// Adds indexing register $ixS to an addressing register $arD.
// It is critical for the Zelda ucode that this one wraps correctly.
void addarn(const UDSPInstruction opc)
{
u8 dreg = opc & 0x3;
u8 sreg = (opc >> 2) & 0x3;
g_dsp.r.ar[dreg] = dsp_increase_addr_reg(dreg, (s16)g_dsp.r.ix[sreg]);
}
//----
// SBCLR #I
// 0001 0011 aaaa aiii
// bit of status register $sr. Bit number is calculated by adding 6 to
// immediate value I.
void sbclr(const UDSPInstruction opc)
{
u8 bit = (opc & 0x7) + 6;
g_dsp.r.sr &= ~(1 << bit);
}
// SBSET #I
// 0001 0010 aaaa aiii
// Set bit of status register $sr. Bit number is calculated by adding 6 to
// immediate value I.
void sbset(const UDSPInstruction opc)
{
u8 bit = (opc & 0x7) + 6;
g_dsp.r.sr |= (1 << bit);
}
// This is a bunch of flag setters, flipping bits in SR. So far so good,
// but it's harder to know exactly what effect they have.
void srbith(const UDSPInstruction opc)
{
zeroWriteBackLog();
switch ((opc >> 8) & 0xf)
{
// M0/M2 change the multiplier mode (it can multiply by 2 for free).
case 0xa: // M2
g_dsp.r.sr &= ~SR_MUL_MODIFY;
break;
case 0xb: // M0
g_dsp.r.sr |= SR_MUL_MODIFY;
break;
// If set, treat multiplicands as unsigned.
// If clear, treat them as signed.
case 0xc: // CLR15
g_dsp.r.sr &= ~SR_MUL_UNSIGNED;
break;
case 0xd: // SET15
g_dsp.r.sr |= SR_MUL_UNSIGNED;
break;
// Automatic 40-bit sign extension when loading ACx.M.
// SET40 changes something very important: see the LRI instruction above.
case 0xe: // SET16 (CLR40)
g_dsp.r.sr &= ~SR_40_MODE_BIT;
break;
case 0xf: // SET40
g_dsp.r.sr |= SR_40_MODE_BIT;
break;
default:
break;
}
}
//----
void unknown(const UDSPInstruction opc)
{
ERROR_LOG(DSPLLE, "LLE: Unrecognized opcode 0x%04x, pc 0x%04x", opc, g_dsp.pc);
}
} // namespace