When there are no games to display in the game list, DolphinWX shows a
message instead. Clicking the message will perform an action. If the game
list truly is empty, the message and action are for opening a browse
dialog, but if the user has hidden some games, they are instead for
unhiding all games. However, the condition for checking which message to
display lacked some parts that are in the condition for checking which
action to use, so the two could be different in rare cases. This PR fixes
that by breaking out the two conditions to a new unified function.
Dolphin has supported the recalibration shortcut (X+Y+Start) for quite a long while. So if someont's axises are terrible, you could easily
recalibrate.
Games even get the initial calibration upon boot(Most of the time).
While changing over the GCAdapter code, I was testing to make sure the reset and calibration shortcuts still worked, turns out they didn't work at
all.
Looking in to the problem, we capture the combination properly, and we wait three seconds until we actually fire that off recalibration.
The problem is for Nintendo's SDK to properly handle recalibrating, we need to send back data saying that it needs to recalibrate.
On hardware this is done as part of the 64bits of data the controller sends back to us.
On holding of the controller, bit 61 of the return value is set, which the Nintendo SDK catches, and then signals immediately afterwards a CMD_ORIGIN
command in order to recalibrate the controller.
We were outright ignoring this bit, so the library wasn't ever recalibrating. I suspect in the past the class itself used to use the calibration data
to to offset the data, but somewhere along the lines it got munged out of existence.
The Gamecube adapter does this shortcut in a bit of a unique way, instead of sending the command and having the library support it and what have you.
Once holding the shortcut for the amount of time, the adapter reports back that the controller has actually been disconnected. Then when you let go of
the combination, the adapter states that a new device has been connected to that port, and the recalibration happens because a new device is
"connected."
This fixes controller calibration for both emulated GC controllers and also the Wii Gamecube Adapter.
We don't throttle by frames, we throttle by coretiming speed.
So looking up VI for calculating the speed was just very wrong.
The new ini option is a float, 1.0f for fullspeed.
In the GUI, percentual values are used.
The Wii U Gamecube controller adapter setup has always been a bit weird. It tries to be as automatic as possible to make the user experience as easy
as possible.
The problem with this approach is that it brings a large disconnect in the user experience because you have the Gamecube controller setup with regular
gamepads and then for some reason below that you have a "direct connect" option which will cause the Gamecube Adapter to overwrite the regular inputs
if something was connected.
While this works and allows the user to only click one checkbox to get the device working, it breaks the user's experience because they don't really
know what "direct connect" means and won't look it up to figure out what it is. Just expecting the device to work (At least one occurence of this in
the IRC channel in the last week).
This way around also had the terrible nature of making the code more filthy than it needed to be. The GCAdapter namespace was parasitic and hooked in
to the regular GC Controller SI class to overwrite the data that it was getting from the default configuration.
Now instead we have a specific SIDevice class for the Wii U Gamecube adapter. This class is fairly simple and is a child of the regular SI Gamecube
Pad device and only reimplements what it needs to.
This also gives the ability to configure controllers individually, which allows the user to configure rumble individually per pad input.
Overall the code is cleaner, and it fits more in line with how the rest of Dolphin works.
Using the XPM format for images has become a maintenance problem because
people don't know how to create them. This commit removes all XPM images
and all C files that contain PNG images. DolphinWX now uses the PNGs
in the Resources folder instead, just like DolphinQt and DolphinQt2 do.
Lets the user set the following in intervals of 10 between 10 and 100;
- Stick/Radius (default 100,000000)
- Triggers/Threshold (default 90,000000)
- Tilt/Modifier/Range (default 50,000000) + mapped Tilt/Modifier button
to the configurations for wiimotes & nunchuks
This reverts commit 81414b4fa2, reversing
changes made to b926061f64.
Conflicts:
Source/Core/DolphinWX/Frame.cpp
Source/Core/VideoCommon/VideoConfig.cpp
Source/Core/VideoCommon/VideoConfig.h
It's so that the string in ControllerConfigDiag will match the string
in GameCubeConfigPane. Right now, it unnecessarily appears twice in
the list of strings to translate.
Commit 33487ab5f2 introduced a regression
where items would vanish from the toolbar. This adds a call to Realize()
after the reinsertions of the play/pause button as required per
documentation.
Thanks to Simonwayneee for noticing this!
This fixes changing the play/pause button's label depending on the
emulation state. Before, wxToolBarToolBase's SetLabel() function was
used. This function, however, is not implemented in wxGTK which leads to
the label not changing on linux when the button is clicked. Although the preferred
method (according to the wxWidgets documentation) to change the properties
of a tool is to use the toolbar's setters, there is no such setter for
the label. Therefore, this implements a workaround where the
button is deleted and readded afterwards with the updated properties.
Thanks to linkmauve for noticing this!
Rather than rely on the developer to do the right thing,
just make the default behavior safely deallocate resources.
If shared semantics are ever needed in the future, the
constructor that takes a unique_ptr for shared_ptr can
be used.
fileplatform is moved so it's in the same place as the other platform
icons, and nobanner is moved just because it fits better in Resources.
Both of them were identical in all of Dolphin's themes.
It was only implemented in OpenGL, though the option was visible in both
backends, leading to memory leaks if you enabled it in DirectX.
And it wasn't particularly useful as a debug feature as it only showed
where in the EFB the copies were taken from, not what format it was, or
what the copy was used for, or what content was in the EFB at that point
in time.
Also, it stretched the copy regions relative to the window, so the
on-screen regions don't even line up with the window unless the game used
the full EFB (some pal games) and you game image stretched to the full
window.
This check is not useful anymore since that website is not running their own
buildbots anymore. It's also trivially bypassable -- it just happened to work
when the builds were fully automated over there.
It's used by both the GUI to do things like install WADs and check up on
the system menu, in which case the global root should be used, and by
/dev/es, in which case the local one should. The latter isn't
*terribly* useful today, since no contents will ever be installed in
temporary roots (although it's still relevant for data directories), but
converting the whole thing makes sense because then it will Just Work
once the entire NAND is synced.
Because it would have been a bit of work to split it up (but I can if
desired), this commit also contains some basic cleanup of
NANDContentLoader:
(1) The useless interface class INANDContentLoader is removed and the
methods are changed to just return CNANDContentLoader (the only
implementation);
(2) CNANDContentManager is changed to use unique_ptr and cleaned up a
bit.
Before the columns of the gamelist were filled with content regardless
of their visibility. This led to display bugs when certain columns, for
example the region column, were hidden.
The first problem was the InsertItemInReportView() function because it
refilled all columns with content on every call to update() without
checking for their visibility. While this issue would have easily been solved
by adding conditionals before each column update, the maker column would
have still caused problems for it autohides on resize and those do not
call update(). Therefore it was necessary to move the column update logic
from InsertItemInReportView() to a new one that allows for seperate
modification of an item's columns.
After fixing the deadlock in #3006, it is now possible for log
messages to flood in faster than UpdateLog can render them.
This causes it to never return, locking up the gui thread and
filling the windows message queue (which triggers the stack
overflow bug in older versions of Wx)
* Makes HBC icons look better
* Fixes the issue with white dots appearing in downscaled images
* No longer subjectively better for GC banners according to comex
Removed Quality Levels from D3D AA options
Dropdown text now shows whether you're applying MSAA or SSAA
Added a description for SSAA
Moved SSAA checkbox
Cleaned up AA in backends slightly. Supported modes is now a list of ints.
Added 3 depth/convergence presets. They are adjustable via (existing) hotkeys - changes to depth and convergence are applied to current preset.
Added 3 hotkeys for activating presets. Added hotkey for toggle between first and second preset.
Added OSD message for convergence/depth changes.
Presets are saved into per-game configs.
titles.txt is read into a map and passed to the GameListItem
constructor, making game list scanning a bit more efficient.
ISOPropreties's constructor is changed to take a GameListItem as an
argument instead of creating one on its own, because ISOPropreties
doesn't have the titles.txt map that the GameListItem constructor wants.
The custom title reading code is moved so that custom titles are
returned by GameListItem::GetName(). The comparison code is changed
to use GetName() instead of GetName(DiscIO::IVolume::ELanguage).
GetName(DiscIO::IVolume::ELanguage) must not return custom titles,
because netplay relies on it returning the same name for all players.
Main Stick is changed to Control Stick and C-Stick is changed to C Stick.
A new ui_name variable is added to ControlGroup so that the UI strings
in DolphinWX can be updated without breaking backwards compatibility
with config INIs and other things that use names as IDs.
An KHR_debug callback could end up waiting for a mutex
on a thread which calls windows system functions.
While this is not expressly forbidden by the standards,
it does forbid directy calling windows system functions
from a KHR_debug callback. Close enough.
SSAA relies on MSAA being active to work. We only supports 4x SSAA while in fact you can enable SSAA at any MSAA level.
I even managed to run 64xMSAA + SSAA on my Quadro which made some pretty sleek looking games. They were very cinematic though.
With this, it properly fixes up SSAA and MSAA support in GLES as well. Before they were broken when stereo rendering was enabled.
Now in GLES they can properly support MSAA and also stereo rendering with MSAA enabled(with proper extensions).
HBC uses files named icon.png for icons. This change makes Dolphin
support that file name, and also [executable file name].png
in case someone wants to have multiple files in one folder.
The HBC banner support is mainly intended for DOL and ELF files,
but it can also be used to override banners of disc images,
something that wasn't possible in the past.
There are currently issues with banner scaling not preserving
the aspect ratio and looking bad in general.
With auto-updating lists, searching for the previous value isn't
necessary. Also, this breaks out specific functionality into their own
functions, which helps separate UI code from the data processing code.
modified: Source/Core/DolphinWX/Cheats/CheatSearchTab.h
