### What?
There are a bunch of different bugs caused by the same underlying issue,
but the common thread is that performing any sort of router cache update
(either through `router.refresh()`, `revalidatePath()`, or `redirect()`)
inside of a parallel route would break the router preventing subsequent
actions, and not resolve any pending state such as from `useFormState`.
### Why?
`applyPatch` is responsible for taking an update response from the
server and merging it into the client router cache. However, there's
specific bailout logic to skip over applying the patch to a
`__DEFAULT__` segment (which corresponds with a `default.tsx` page).
When the router detects a cache node that is expected to be rendered on
the page but contains no data, the router will trigger a lazy fetch to
retrieve the data that's expected to be there
([ref](5adacb6912/packages/next/src/client/components/layout-router.tsx (L359-L370)))
and then update the router cache once the data resolves
([ref](5adacb6912/packages/next/src/client/components/layout-router.tsx (L399-L404))).
This is causing the router to get stuck in a loop: it'll fetch the data
for the cache node, send the data to the router reducer to merge it into
the existing cache nodes, skip merging that data in for `__DEFAULT__`
segments, and repeat.
### How?
We currently assign `__DEFAULT__` to have `notFound()` behavior when
there isn't a `default.tsx` component for a particular segment. This
makes it so that when loading a page that renders a slot without slot
content / a `default`, it 404s. But when performing a client-side
navigation, the intended behavior is different: we keep whatever was in
the `default` slots place, until the user refreshes the page, which
would then 404.
However, this logic is incorrect when triggering any of the above
mentioned cache node revalidation strategies: if we always skip applying
to the `__DEFAULT__` segment, slots will never properly handle reducer
actions that rely on making changes to their cache nodes.
This splits these different `applyPatch` functions: one that will apply
to the full tree, and another that'll apply to everything except the
default segments with the existing bailout condition.
Fixes#54173Fixes#58772Fixes#54723Fixes#57665
Closes NEXT-1706
Closes NEXT-1815
Closes NEXT-1812
## What?
Ensures `Object.entries` is not called on the `Map`. Seems this only
fails in a very particular case but potentially this fixes other issues
than the one I added in the tests too.
## How?
`Object.entries()` results in an empty array when called on a `Map`.
Created a shared type declaration for the value and removed the
`Object.entries`. Benefit of this is that we can skip the loop as well.
<!-- Thanks for opening a PR! Your contribution is much appreciated.
To make sure your PR is handled as smoothly as possible we request that
you follow the checklist sections below.
Choose the right checklist for the change(s) that you're making:
## For Contributors
### Improving Documentation
- Run `pnpm prettier-fix` to fix formatting issues before opening the
PR.
- Read the Docs Contribution Guide to ensure your contribution follows
the docs guidelines:
https://nextjs.org/docs/community/contribution-guide
### Adding or Updating Examples
- The "examples guidelines" are followed from our contributing doc
https://github.com/vercel/next.js/blob/canary/contributing/examples/adding-examples.md
- Make sure the linting passes by running `pnpm build && pnpm lint`. See
https://github.com/vercel/next.js/blob/canary/contributing/repository/linting.md
### Fixing a bug
- Related issues linked using `fixes #number`
- Tests added. See:
https://github.com/vercel/next.js/blob/canary/contributing/core/testing.md#writing-tests-for-nextjs
- Errors have a helpful link attached, see
https://github.com/vercel/next.js/blob/canary/contributing.md
### Adding a feature
- Implements an existing feature request or RFC. Make sure the feature
request has been accepted for implementation before opening a PR. (A
discussion must be opened, see
https://github.com/vercel/next.js/discussions/new?category=ideas)
- Related issues/discussions are linked using `fixes #number`
- e2e tests added
(https://github.com/vercel/next.js/blob/canary/contributing/core/testing.md#writing-tests-for-nextjs)
- Documentation added
- Telemetry added. In case of a feature if it's used or not.
- Errors have a helpful link attached, see
https://github.com/vercel/next.js/blob/canary/contributing.md
## For Maintainers
- Minimal description (aim for explaining to someone not on the team to
understand the PR)
- When linking to a Slack thread, you might want to share details of the
conclusion
- Link both the Linear (Fixes NEXT-xxx) and the GitHub issues
- Add review comments if necessary to explain to the reviewer the logic
behind a change
### What?
### Why?
### How?
Closes NEXT-
Fixes #
-->
This fixes some of headers (and adds associated tests) for pages when
PPR is enabled. Namely, the `Cache-Control` headers are now returning
correctly, reflecting the non-cachability of some requests:
- Requests that postpone (dynamic data is streamed after the initial
static shell is streamed)
- Requests for the Dynamic RSC payload
Additionally, the `X-NextJS-Cache` header has been updated for better
support for PPR:
- Requests that postpone no longer return this header as it doesn't
reflect the cache state of the request (because it streams)
- Requests for the Prefetch RSC now returns the correct cache headers
depending on the segment and pre-postpone state
This also enables the other pathnames in the test suites 🙌🏻
Closes NEXT-1840
## What?
Fixes a bug where `useOptimistic` wouldn't trigger a compiler error when
imported in Server Components.
Adds tests for the following `import { x } from 'react'` in Server
Components, where `x` is the value:
- Component
- createContext
- createFactory
- PureComponent
- useDeferredValue
- useEffect
- useImperativeHandle
- useInsertionEffect
- useLayoutEffect
- useReducer
- useRef
- useState
- useSyncExternalStore
- useTransition
- useOptimistic
These show a particular error explaining how to add `"use client"`:
<!-- Thanks for opening a PR! Your contribution is much appreciated.i:
To make sure your PR is handled as smoothly as possible we request that
you follow the checklist sections below.
Choose the right checklist for the change(s) that you're making:
## For Contributors
### Improving Documentation
- Run `pnpm prettier-fix` to fix formatting issues before opening the
PR.
- Read the Docs Contribution Guide to ensure your contribution follows
the docs guidelines:
https://nextjs.org/docs/community/contribution-guide
### Adding or Updating Examples
- The "examples guidelines" are followed from our contributing doc
https://github.com/vercel/next.js/blob/canary/contributing/examples/adding-examples.md
- Make sure the linting passes by running `pnpm build && pnpm lint`. See
https://github.com/vercel/next.js/blob/canary/contributing/repository/linting.md
### Fixing a bug
- Related issues linked using `fixes #number`
- Tests added. See:
https://github.com/vercel/next.js/blob/canary/contributing/core/testing.md#writing-tests-for-nextjs
- Errors have a helpful link attached, see
https://github.com/vercel/next.js/blob/canary/contributing.md
### Adding a feature
- Implements an existing feature request or RFC. Make sure the feature
request has been accepted for implementation before opening a PR. (A
discussion must be opened, see
https://github.com/vercel/next.js/discussions/new?category=ideas)
- Related issues/discussions are linked using `fixes #number`
- e2e tests added
(https://github.com/vercel/next.js/blob/canary/contributing/core/testing.md#writing-tests-for-nextjs)
- Documentation added
- Telemetry added. In case of a feature if it's used or not.
- Errors have a helpful link attached, see
https://github.com/vercel/next.js/blob/canary/contributing.md
## For Maintainers
- Minimal description (aim for explaining to someone not on the team to
understand the PR)
- When linking to a Slack thread, you might want to share details of the
conclusion
- Link both the Linear (Fixes NEXT-xxx) and the GitHub issues
- Add review comments if necessary to explain to the reviewer the logic
behind a change
### What?
### Why?
### How?
Closes NEXT-
Fixes #
-->
## What?
Adds two tests for server actions returning client components:
- (supported) Importing a server action from a server component. That
server action imports a client component and returns it.
- (not supported yet) Importing a server action from a client component.
The server action imports a client component and returns it.
The second case is not supported yet as it would effectively mean a
compilation loop:
`server` -> `client` -> `server` -> `client`
and if that last client component includes another server action it goes
even further:
`server` -> `client` -> `server` -> `client` -> `server` (and if that
server action includes anothe client component it goes further and
further)
Whereas currently it's only `server` -> `client` -> `server`, so it's
limited to that.
In the future we should be able to support this
server->client->server->client loop in Turbopack specifically because
Turbopack has a single module graph.
Importing the client component in a server action that is defined in the
server compiler (i.e. when created inline or when imported from a server
component) it does work correctly already.
<!-- Thanks for opening a PR! Your contribution is much appreciated.
To make sure your PR is handled as smoothly as possible we request that
you follow the checklist sections below.
Choose the right checklist for the change(s) that you're making:
## For Contributors
### Improving Documentation
- Run `pnpm prettier-fix` to fix formatting issues before opening the
PR.
- Read the Docs Contribution Guide to ensure your contribution follows
the docs guidelines:
https://nextjs.org/docs/community/contribution-guide
### Adding or Updating Examples
- The "examples guidelines" are followed from our contributing doc
https://github.com/vercel/next.js/blob/canary/contributing/examples/adding-examples.md
- Make sure the linting passes by running `pnpm build && pnpm lint`. See
https://github.com/vercel/next.js/blob/canary/contributing/repository/linting.md
### Fixing a bug
- Related issues linked using `fixes #number`
- Tests added. See:
https://github.com/vercel/next.js/blob/canary/contributing/core/testing.md#writing-tests-for-nextjs
- Errors have a helpful link attached, see
https://github.com/vercel/next.js/blob/canary/contributing.md
### Adding a feature
- Implements an existing feature request or RFC. Make sure the feature
request has been accepted for implementation before opening a PR. (A
discussion must be opened, see
https://github.com/vercel/next.js/discussions/new?category=ideas)
- Related issues/discussions are linked using `fixes #number`
- e2e tests added
(https://github.com/vercel/next.js/blob/canary/contributing/core/testing.md#writing-tests-for-nextjs)
- Documentation added
- Telemetry added. In case of a feature if it's used or not.
- Errors have a helpful link attached, see
https://github.com/vercel/next.js/blob/canary/contributing.md
## For Maintainers
- Minimal description (aim for explaining to someone not on the team to
understand the PR)
- When linking to a Slack thread, you might want to share details of the
conclusion
- Link both the Linear (Fixes NEXT-xxx) and the GitHub issues
- Add review comments if necessary to explain to the reviewer the logic
behind a change
### What?
### Why?
### How?
Closes NEXT-
Fixes #
-->
Closes NEXT-1873
This ensures that `export const dynamic = 'force-static'` is properly
honored when a page contains fetches with `cache: 'no-store'`, `cache:
'no-cache'` or `next: { revalidate: 0 }`.
Closes NEXT-1858
Previously when running deployment tests, the testing infrastructure
used the Vercel REST API to manage and work with deployments to perform
the actual testing. This now utilizes the Vercel CLI instead (while
maintaining the same beheviour as before) to simplifiy the
implementation.
In cases where testing is performed against a locally configured Vercel
CLI that's already authenticated it will now use those pre-configured
credentials.
Closes NEXT-1841
Passing `NODE_OPTIONS='--inspect'` was failing because a sub-process was
getting created (`getRegistry()`) which would trigger a "address already
in use" error when the process inherited the same debugger port from the
parent process.
I had to disable this test in
https://github.com/vercel/next.js/pull/59508 because it wasn't passing,
CI was just skipping it. This PR fixes the behavior and re-enables the
test.
Fixes#55862
Closes NEXT-1854
I want to give this field a name that's bit less generic and
distinguishes it from `lazyData` (because that one has a different type
and is a special case we want to eventually remove).
I'm also about to add an optional `prefetchRsc` field that represents a
prefetched version of the same value. The common suffix is meant to
communicate how they are related.
Doing this rename in its own PR because it's a pure find-and-replace,
whereas the later steps are not.
Closes NEXT-1846
This was incorrectly setting the upper bound on the `--group` argument
to our test runners (ie, `11/122`), which was causing a lot of tests to
be missed.
Closes NEXT-1851
Before PPR, the way instant navigations work in Next.js is we prefetch
everything up to the first route segment that defines a loading.js
boundary. The rest of the tree is defered until the actual navigation.
It does not take into account whether the data is dynamic — even if the
tree is completely static, it will still defer everything inside the
loading boundary.
The approach with PPR is different — we prefetch as deeply as possible,
and only defer when dynamic data is accessed. If so, we only defer the
nearest parent Suspense boundary of the dynamic data access, regardless
of whether the boundary is defined by loading.js or a normal <Suspense>
component in userspace.
This PR removes the partial behavior of loading.js when the PPR flag is
enabled. In effect, loading.js now acts like a regular Suspense boundary
with no additional special behavior.
Note that in practice this usually means we'll end up prefetching more
than we were before PPR, which may or may not be considered a
performance regression by some apps. The plan is to address this before
General Availability of PPR by introducing granular per-segment
fetching, so we can reuse as much of the tree as possible during both
prefetches and dynamic navigations. But during the beta period, we
should be clear about this trade off in our communications.
## Testing strategy
While I was writing a test, I noticed that it's currently pretty
difficult to test all the scenarios that PPR is designed to handle, so I
gave special attention to setting up a testing strategy that I hope will
make this easier going forward. The overall pattern is based on how
we've been testing concurrent rendering features in the React repo for
many years:
- In the e2e test, spin up an HTTP server for responding to requests
sent by the test app. This simulates the data service that would be used
in a real Next.js application, whether it's direct db access, an ORM, or
a higher-level data access layer. The e2e test can observe when
individual requests are received, and control the timing of when the
data is fulfilled, without needing to mock any lower level I/O. (We're
already using a similar pattern to [test fetch
deduping](a3616d33ed/test/e2e/app-dir/app-fetch-deduping/app-fetch-deduping.test.ts (L8-L29)).)
- Each time a request is received, write to an event log. Then assert on
the result of the log at different points throughout the test. This
helps catch subtle mistakes where the order of events is not expected,
or the same event happens more than it should.
(I wrote some test helpers, but to avoid early abstraction, I've
intentionally not moved them into a separate module.)
Closes NEXT-1779
### What?
switch turbopack to use a single client components entrypoint for all
client components on a page for development. This aligns it with the
webpack behavior.
### Why?
compiling a separate entrypoint for every client component is pretty
expensive in regards of compilation, chunking, code generation, file
writing and number of requests.
### Turbopack Changes
* https://github.com/vercel/turbo/pull/6713 <!-- Tobias Koppers - use
real emojis -->
* https://github.com/vercel/turbo/pull/6728 <!-- Tobias Koppers - fix
order of reverse topologic iteration -->
Closes PACK-2115
<!-- Thanks for opening a PR! Your contribution is much appreciated.
To make sure your PR is handled as smoothly as possible we request that
you follow the checklist sections below.
Choose the right checklist for the change(s) that you're making:
## For Contributors
### Fixing a bug
- Related issues linked using `fixes #number`
- Tests added. See:
https://github.com/vercel/next.js/blob/canary/contributing/core/testing.md#writing-tests-for-nextjs
- Errors have a helpful link attached, see
https://github.com/vercel/next.js/blob/canary/contributing.md
### Adding a feature
- Implements an existing feature request or RFC. Make sure the feature
request has been accepted for implementation before opening a PR. (A
discussion must be opened, see
https://github.com/vercel/next.js/discussions/new?category=ideas)
- Related issues/discussions are linked using `fixes #number`
- e2e tests added
(https://github.com/vercel/next.js/blob/canary/contributing/core/testing.md#writing-tests-for-nextjs)
- Documentation added
- Telemetry added. In case of a feature if it's used or not.
- Errors have a helpful link attached, see
https://github.com/vercel/next.js/blob/canary/contributing.md
## For Maintainers
- Minimal description (aim for explaining to someone not on the team to
understand the PR)
- When linking to a Slack thread, you might want to share details of the
conclusion
- Link both the Linear (Fixes NEXT-xxx) and the GitHub issues
- Add review comments if necessary to explain to the reviewer the logic
behind a change
### What?
### Why?
### How?
Closes NEXT-
Fixes#58087
-->
fixes#58087
Currently in Next 14, everyone has fullURL flag turned to true, this PR
reverts the condition.
---------
Co-authored-by: Jiachi Liu <inbox@huozhi.im>
Fixes ability to run `NODE_OPTIONS='--inspect' next dev` as described in
[docs](https://nextjs.org/docs/pages/building-your-application/configuring/debugging),
by removing inspect option from NODE_OPTIONS arg passed to worker
process.
This bug seem to have been introduced in
7d93808c43 as a part of a some
refactoring. See how `getNodeOptionsWithoutInspect` is no longer used.
Fixes#55862
---------
Co-authored-by: Jiachi Liu <inbox@huozhi.im>
### What?
While scrolled on a page, and when following a link to a new page and
clicking the browser back button or using `router.back()`, the scroll
position would sometimes restore scroll to the incorrect spot (in the
case of the test added in this PR, it'd scroll you back to the top of
the list)
### Why?
The refactor in #56497 changed the way router actions are processed:
specifically, all actions were assumed to be async, even if they could
be handled synchronously. For most actions this is fine, as most are
currently async. However, `ACTION_RESTORE` (triggered when the
`popstate` event occurs) isn't async, and introducing a small amount of
delay in the handling of this action can cause the browser to not
properly restore the scroll position
### How?
This special-cases `ACTION_RESTORE` to synchronously process the action
and call `setState` when it's received, rather than creating a promise.
To consistently reproduce this behavior, I added an option to our
browser interface that'll allow us to programmatically trigger a CPU
slowdown.
h/t to @alvarlagerlof for isolating the offending commit and sharing a
minimal reproduction.
Closes NEXT-1819
Likely addresses #58899 but the reproduction was too complex to verify.
## What?
- Add support for `experimental.externalDir` -- Was already supported,
just makes Turbopack not fail on that config option
- Skipped `with-babel` test because it tests Babel
- Skipped `swc-warnings` test because it tests Babel
- Skipped `config-resolve-alias` as it tests webpack config
- Skipped `undefined-webpack-config` as it tests webpack config
<!-- Thanks for opening a PR! Your contribution is much appreciated.
To make sure your PR is handled as smoothly as possible we request that
you follow the checklist sections below.
Choose the right checklist for the change(s) that you're making:
## For Contributors
### Improving Documentation
- Run `pnpm prettier-fix` to fix formatting issues before opening the
PR.
- Read the Docs Contribution Guide to ensure your contribution follows
the docs guidelines:
https://nextjs.org/docs/community/contribution-guide
### Adding or Updating Examples
- The "examples guidelines" are followed from our contributing doc
https://github.com/vercel/next.js/blob/canary/contributing/examples/adding-examples.md
- Make sure the linting passes by running `pnpm build && pnpm lint`. See
https://github.com/vercel/next.js/blob/canary/contributing/repository/linting.md
### Fixing a bug
- Related issues linked using `fixes #number`
- Tests added. See:
https://github.com/vercel/next.js/blob/canary/contributing/core/testing.md#writing-tests-for-nextjs
- Errors have a helpful link attached, see
https://github.com/vercel/next.js/blob/canary/contributing.md
### Adding a feature
- Implements an existing feature request or RFC. Make sure the feature
request has been accepted for implementation before opening a PR. (A
discussion must be opened, see
https://github.com/vercel/next.js/discussions/new?category=ideas)
- Related issues/discussions are linked using `fixes #number`
- e2e tests added
(https://github.com/vercel/next.js/blob/canary/contributing/core/testing.md#writing-tests-for-nextjs)
- Documentation added
- Telemetry added. In case of a feature if it's used or not.
- Errors have a helpful link attached, see
https://github.com/vercel/next.js/blob/canary/contributing.md
## For Maintainers
- Minimal description (aim for explaining to someone not on the team to
understand the PR)
- When linking to a Slack thread, you might want to share details of the
conclusion
- Link both the Linear (Fixes NEXT-xxx) and the GitHub issues
- Add review comments if necessary to explain to the reviewer the logic
behind a change
### What?
### Why?
### How?
Closes NEXT-
Fixes #
-->
Closes NEXT-1817
### What?
Visiting an edge catch-all route incorrectly truncates multiple
parameters
### Why?
The params are currently coerced into a `ParsedURLQuery`-like format by
calling `Object.fromEntries` on `searchParams`, but this doesn't
consider multiple param values assigned to the same key
### How?
Rather than use `fromEntries`, this uses an existing util to get the
path into `ParsedURLQuery` format.
Closes NEXT-1814
Fixes#59333
### What?
When running a
[multi-zone](https://github.com/vercel/next.js/tree/canary/examples/with-zones)
app in dev, app pages would infinitely reload
### Why?
The HMR upgrade request would fail and get caught into a retry loop. In
the multi-zone case, they fail because the upgrade request would be sent
again for a request that had already been upgraded. This resulted in a
"server.handleUpgrade() was called more than once with the same socket"
error, causing the upgrade request to fail.
Every time a retry occurred, the page would trigger a full refresh since
certain HMR errors cause the browser to reload.
### How?
This ensures the upgrade handler only responds to requests that match
the configured basePath.
Closes NEXT-1797
Fixes#59161Fixes#56615Fixes#54454
This makes some critical modifications to the app render pipeline when
PPR has been enabled for pages with segments defining:
```js
export const dynamic = "force-dynamic"
```
Importantly, it no longer modifies the revalidation time to zero for
those pages, and now falls back to the provided default revalidation
time. When static render occurs, if the page being rendered has a
segment config defining `dynamic === "force-dynamic"`, then it will
postpone at the root of the component tree. This ensures that no render
code is executed for the page, as the entirety of the tree will have
postponed. This fixes the bug where the flight prefetch wasn't generated
correctly as well.
### What?
Using an interception marker next to a dynamic segment does not behave
properly when deployed to Vercel
### Why?
The named route regex that gets created is not accounting for the
interception marker, which is causing the non-intercepted route to match
the intercepted serverless function.
### How?
This factors in the interception marker when building the named route
regex so that the non-intercepted route regex properly matches when
loading the non-intercepted page.
Deployment verified here: https://test-intercept-mu.vercel.app/
Closes NEXT-1786
Fixes#54650
Fixes#57624. The recent issue was an unexpected side effect caused by
305bb01506,
which only affects specific packages like `@mui/material`.
The problem was that the entry file of `@mui/material` has `"use
client"` at top, which affects the compilation result to output
reference info only (when on the RSC layer), instead of keeping the
original export statements. And the fix here is to ignore all layer info
and React specific transforms here, as barrel optimization isn't related
to all these framework features at all. To keep all directives
unchanged, the SWC transform needs to parse and pass that info to the
Webpack loader.
This PR adds a test to ensure that `@mui/material` is working as
expected (less than 1500 modules compiled). Without this feature it'll
be ~2400 modules.
Closes NEXT-1793, closes NEXT-1762.
## What?
Skips more tests that are running `next build` which is not supported by
Turbopack yet.
## How?
Used an approach where all `next build` tests would fail if
`TURBOPACK=1` is set, which is how the tests run. This highlighted the
cases `next build` was still running.
<!-- Thanks for opening a PR! Your contribution is much appreciated.
To make sure your PR is handled as smoothly as possible we request that
you follow the checklist sections below.
Choose the right checklist for the change(s) that you're making:
## For Contributors
### Improving Documentation
- Run `pnpm prettier-fix` to fix formatting issues before opening the
PR.
- Read the Docs Contribution Guide to ensure your contribution follows
the docs guidelines:
https://nextjs.org/docs/community/contribution-guide
### Adding or Updating Examples
- The "examples guidelines" are followed from our contributing doc
https://github.com/vercel/next.js/blob/canary/contributing/examples/adding-examples.md
- Make sure the linting passes by running `pnpm build && pnpm lint`. See
https://github.com/vercel/next.js/blob/canary/contributing/repository/linting.md
### Fixing a bug
- Related issues linked using `fixes #number`
- Tests added. See:
https://github.com/vercel/next.js/blob/canary/contributing/core/testing.md#writing-tests-for-nextjs
- Errors have a helpful link attached, see
https://github.com/vercel/next.js/blob/canary/contributing.md
### Adding a feature
- Implements an existing feature request or RFC. Make sure the feature
request has been accepted for implementation before opening a PR. (A
discussion must be opened, see
https://github.com/vercel/next.js/discussions/new?category=ideas)
- Related issues/discussions are linked using `fixes #number`
- e2e tests added
(https://github.com/vercel/next.js/blob/canary/contributing/core/testing.md#writing-tests-for-nextjs)
- Documentation added
- Telemetry added. In case of a feature if it's used or not.
- Errors have a helpful link attached, see
https://github.com/vercel/next.js/blob/canary/contributing.md
## For Maintainers
- Minimal description (aim for explaining to someone not on the team to
understand the PR)
- When linking to a Slack thread, you might want to share details of the
conclusion
- Link both the Linear (Fixes NEXT-xxx) and the GitHub issues
- Add review comments if necessary to explain to the reviewer the logic
behind a change
### What?
### Why?
### How?
Closes NEXT-
Fixes #
-->
Closes NEXT-1791
This resolves an issue introduced in #52361 where `shouldOmit` is
overwritten based on if it is a directory or not without considering
include conditions.
In an environment where the the application being built is orchestrated
and managed by bazel, all files are symbolic links and thus without this
the file includes predicate checks aren't considered - and the build
fails under certain conditions.
<!-- Thanks for opening a PR! Your contribution is much appreciated.
To make sure your PR is handled as smoothly as possible we request that
you follow the checklist sections below.
Choose the right checklist for the change(s) that you're making:
## For Contributors
### Improving Documentation
- Run `pnpm prettier-fix` to fix formatting issues before opening the
PR.
- Read the Docs Contribution Guide to ensure your contribution follows
the docs guidelines:
https://nextjs.org/docs/community/contribution-guide
### Adding or Updating Examples
- The "examples guidelines" are followed from our contributing doc
https://github.com/vercel/next.js/blob/canary/contributing/examples/adding-examples.md
- Make sure the linting passes by running `pnpm build && pnpm lint`. See
https://github.com/vercel/next.js/blob/canary/contributing/repository/linting.md
### Fixing a bug
- Related issues linked using `fixes #number`
- Tests added. See:
https://github.com/vercel/next.js/blob/canary/contributing/core/testing.md#writing-tests-for-nextjs
- Errors have a helpful link attached, see
https://github.com/vercel/next.js/blob/canary/contributing.md
### Adding a feature
- Implements an existing feature request or RFC. Make sure the feature
request has been accepted for implementation before opening a PR. (A
discussion must be opened, see
https://github.com/vercel/next.js/discussions/new?category=ideas)
- Related issues/discussions are linked using `fixes #number`
- e2e tests added
(https://github.com/vercel/next.js/blob/canary/contributing/core/testing.md#writing-tests-for-nextjs)
- Documentation added
- Telemetry added. In case of a feature if it's used or not.
- Errors have a helpful link attached, see
https://github.com/vercel/next.js/blob/canary/contributing.md
## For Maintainers
- Minimal description (aim for explaining to someone not on the team to
understand the PR)
- When linking to a Slack thread, you might want to share details of the
conclusion
- Link both the Linear (Fixes NEXT-xxx) and the GitHub issues
- Add review comments if necessary to explain to the reviewer the logic
behind a change
### What?
### Why?
### How?
Closes NEXT-
Fixes #
-->
---------
Co-authored-by: Shu Ding <g@shud.in>
