### What?
Resolves issue #61695
### Why?
The `Building Your Application -> Data Fetching -> Server Actions and
Mutations` section in the Next.js documentation has a few mismatches
with respect to JS and TS codes.
---------
Co-authored-by: battuAshita <battua@iitbhilai.ac.in>
Co-authored-by: Sam Ko <sam@vercel.com>
### What?
[1] Clean up `with-supabase` example following patterns from @leerob's
recent video on authentication
[2] Add images to matcher to reduce number of times a session is
refreshed
[3] Move instantiation of `cookieStore` into Supabase server helper
### Why?
[1] Make template easier to understand and use
[2] Reduce likelihood users will receive Auth Rate Limit Exceeded error
[3] Makes creating a Supabase client much simpler in Server Components,
Route Handlers and Server Actions
### How?
[1] Refactor middleware and its helper function
[2] Add image extensions to middleware matcher
[3] Call `cookies()` function from `createClient` helper - this should
still be in the [same execution
context](https://nextjs.org/docs/messages/dynamic-server-error) and
appears to work from my testing, but would be good to get the 👍 from
someone at Vercel
The docs mention using a `Link` to close the modal, but navigating away
from a slot that was active won't automatically unmount unless it
matches with a new page for that slot. This is because client-side
navigations don't switch slots from active -> default. Default is only
used on a hard navigation.
I believe this example used to be in here but got removed, so I re-added
with some extra clarity.
Closes NEXT-2405
Unclear when this can happen currently (hence missing a test), but this adds a safeguard to `applyUrlFromHistoryPushReplace` to ensure that we don't potentially call `ACTION_RESTORE` with data that might be missing from `window.history.state`.
This is consistent with other spots where we're reading this internal flag from state.
The function that calls `applyUrlFromHistoryPushReplace` first calls `copyNextJsInternalHistoryState` to copy over `__PRIVATE_NEXTJS_INTERNALS_TREE` into the data argument of `pushState`/`replaceState`. But technically it does so with the possibility that `__PRIVATE_NEXTJS_INTERNALS_TREE` is undefined. Since that's the case, this is more typesafe.
Closes NEXT-2406
### What
Skipping module build error and module not found error in
`onUnhandledError` handler from pages router dev overlay, to avoid the
build error being caught twice by error overlay in both unhandled error
and build error type. The unhandled error is slightly eariler than build
error, which causes the flash. We skipped it to avoid display same
duplicated errors.
### Why
This change fixes a flashing UX on error overlay when build error
occurred, it will go from a white background with red text to a source
panel with actual code where triggered build error, such as synatx
error. I recodered two videos to show them properly. Since it happens
too fast, hard to address them with test, more like fixing a minor
frustration in the UI.
### After
https://github.com/vercel/next.js/assets/4800338/59dcde0f-3ac7-419f-ba5c-c28c9d5a7205
### Before
https://github.com/vercel/next.js/assets/4800338/e64e8855-2c5f-43a5-948c-8137cad538a1
Closes NEXT-2403
Closes NEXT-2145
This implements falling back to try multiple locations loading chunks
for sourcemap tracing.
Unfortunately, when RSC replays server errors on the client, it does not
carry over the [0] symbol used to annotate server frames. Instead,
errors are recreated by React and only include the message and stack.
This allows more tests to pass, as we are able to correctly trace stack
frames by loading the appropriate server chunk.
Closes PACK-2442
### What
This PR injects a build-time error for the turbopack if
`client|server-only` is imported in incorrect context. The basic idea is
using resolve plugin, so in resolve time if matching context (which
alises erroneous import), raise a build time error.
Unfortunately this won't fix all of the tests in `invalid-imports`, due
to
1. resolveplugin does not have way to trace import from transformed, so
not able to detect `styled-jsx` from using `<styled..` tags
2. webpack (in our implementation) and turbopack's resolveplugin have
different order of transform / module trace chain, so enabling resolve
plugin in some context raises build error instead of runtime error in
rsc-build-error.
Closes PACK-2397
These are correct since #61735 fixed tracing these. Unfortunately they
don’t pass yet as the overlay is not properly dismissed when these
errors are fixed.
Closes PACK-2439
Fixes: #47978
When an error occurs in getInitialProps, the error page's
getInitialProps is run server-side and returned in `__NEXT_DATA__`.
Following, there's no need to re-run `getInitialProps` client-side on
the hydrate pass.
---------
Co-authored-by: JJ Kasper <jj@jjsweb.site>
In preparation for the refactor of cache utils in subsequent PRs, this PR moves the one-off prefetch cache utils into a shared `prefetch-cache-utils` file, and also relocates the `buildCustomRoute` util into an isolated lib so that it can be imported into base-server (in a future PR).
This PR does not make any changes to these functions.
Closes NEXT-2394
### What
Exclude precompiled react packages from browser layer loaders coverage.
### Why
Since we're transpiling all the browser layer code now after #59569,
then SWC will also compile react. But when it compiles
`react.production.min.js` it gives me with the code and ESM helper
inserted
```js
import { _ as _type_of } from "@swc/helpers/_/_type_of"; // This is not correct
var l = Symbol.for("react.element"), n = Symbol.for("react.portal"), p = Symbol.for("react.fragment"), q = Sym
bol.for("react.strict_mode"), r = Symbol.for("react.profiler"), t = Symbol.for("react.provider"), u = Symbol.f
```
This makes bundler think it's a ESM package but actually it's CJS, which
converts the module into `{ default: .., __esModule }` instead of the
original react module.
When you're using `React.useEffect` or other API through namespace
import (`import * as React from 'react'`), this will break the module
exports check in bundling as the property doesn't directly attached to
the module now. This PR disabled the transform for precompiled react
packages now and will see the deeper issue in next-swc side later.
Fixes#60890Fixes#61185
Closes NEXT-2362
### What?
Fix the user-facing `MiddlewareConfig` interface.
~While in the codebase, I also made the incoming config object type a
bit more strict by converting from `any` to `unknown`.~ Reverted, as we
do a config assertion already in a [different
place](https://github.com/vercel/next.js/blob/canary/packages/next-swc/crates/next-custom-transforms/src/transforms/page_config.rs/#L171-L180).
### Why?
The interface we previously exposed was the one we used internally,
_after_ we did some parsing on the config object, which is different
from what the user is expected to pass.
### How?
I separated the internal type to its own `MiddlewareConfigParsed`
interface.
Closes NEXT-2375
Fixes#61705
Ref: #61576
### What?
depends on https://github.com/facebook/react/pull/28108
* fixes CSS Ordering issues due to CSS duplication in production mode
* The issues still happen in dev mode
* Highlights broken CSS Ordering for more dev cases, e. g. CSS in client
components
Closes PACK-2300
### What?
fixes unexpected use client build warning in some applications.
We've consolidated all the ecmaplugins into custom rules. It behaves
different for the ecma inputs, while plugin runs any ecmascript inputs
rules only runs with matching target. The culprit module in question was
published as `.mjs`, so the necessary transform didn't ran.
Closes PACK-2419
In #61649 the paragraph `"This function allows you to redirect the user
to another URL. It can be used in..."` describing `notFound` was copied
as is from the `redirect` jsDoc
---------
Co-authored-by: JJ Kasper <jj@jjsweb.site>
### What
This adds support for navigation signals like `notFound()` and
`redirect(url)` when Partial Prerendering has been enabled.
### Why
Navigation API's like `notFound()` and `redirect(url)` throw errors in
order to interrupt the rendering of components. When a page both invokes
API's that cause the render to be marked as dynamic (like
`unstable_noStore()`) and also a navigation API, these errors may race
to the end. In the case where the navigation error does not beat out the
error emitted by dynamic API's will still trigger the detection warning
that's present to warn you about situations where you may have
accidentally caught the error.
### How
This resolves this issue by explicitly checking for navigation signals
(errors) thrown during the render, and not displaying the "caught
dynamic API" error and console warning.
Closes NEXT-2037
## History
Previously, we added support for `squoosh` because it was a wasm
implementation that "just worked" on all platforms when running `next
dev` for the first time. However, it was slow so we always recommended
manually installing `sharp` for production use cases running `next
build` and `next start`.
Now that [`sharp` supports
webassembly](https://sharp.pixelplumbing.com/install#webassembly), we no
longer need to maintain `squoosh`, so it can be removed. We also don't
need to make the user install sharp manually because it can be installed
under `optionalDependencies`. I left it optional in case there was some
platform that still needed to manually install the wasm variant with
`npm install --cpu=wasm32 sharp` such as codesandbox/stackblitz (I don't
believe sharp has any fallback built in yet).
Since we can guarantee `sharp`, we can also remove `get-orientation` dep
and upgrade `image-size` dep.
I also moved an [existing `sharp`
test](https://github.com/vercel/next.js/pull/56674) into its own fixture
since it was unrelated to image optimization.
## Related Issues
- Fixes https://github.com/vercel/next.js/issues/41417
- Closes https://github.com/vercel/next.js/pull/54670
- Related https://github.com/vercel/next.js/issues/54708
- Related https://github.com/vercel/next.js/issues/44804
- Related https://github.com/vercel/next.js/issues/48820
- parsed stack traces (and error stack locations in js) have 1-based
lines and 1-based columns
- source map tokens have 0-based lines and 0-based columns
- babel code frames use 1-based lines and 0-based columns
This was not always respected. This preserves the 1-based lines and
columns in anything called a stack frame, 0-based lines and columns for
source map apis, and converts to babel’s format as needed.
Closes PACK-2341
---------
Co-authored-by: Tobias Koppers <tobias.koppers@googlemail.com>
<!-- Thanks for opening a PR! Your contribution is much appreciated.
To make sure your PR is handled as smoothly as possible we request that
you follow the checklist sections below.
Choose the right checklist for the change(s) that you're making:
## For Contributors
### Improving Documentation
- Run `pnpm prettier-fix` to fix formatting issues before opening the
PR.
- Read the Docs Contribution Guide to ensure your contribution follows
the docs guidelines:
https://nextjs.org/docs/community/contribution-guide
### Adding or Updating Examples
- The "examples guidelines" are followed from our contributing doc
https://github.com/vercel/next.js/blob/canary/contributing/examples/adding-examples.md
- Make sure the linting passes by running `pnpm build && pnpm lint`. See
https://github.com/vercel/next.js/blob/canary/contributing/repository/linting.md
### Fixing a bug
- Related issues linked using `fixes #number`
- Tests added. See:
https://github.com/vercel/next.js/blob/canary/contributing/core/testing.md#writing-tests-for-nextjs
- Errors have a helpful link attached, see
https://github.com/vercel/next.js/blob/canary/contributing.md
### Adding a feature
- Implements an existing feature request or RFC. Make sure the feature
request has been accepted for implementation before opening a PR. (A
discussion must be opened, see
https://github.com/vercel/next.js/discussions/new?category=ideas)
- Related issues/discussions are linked using `fixes #number`
- e2e tests added
(https://github.com/vercel/next.js/blob/canary/contributing/core/testing.md#writing-tests-for-nextjs)
- Documentation added
- Telemetry added. In case of a feature if it's used or not.
- Errors have a helpful link attached, see
https://github.com/vercel/next.js/blob/canary/contributing.md
## For Maintainers
- Minimal description (aim for explaining to someone not on the team to
understand the PR)
- When linking to a Slack thread, you might want to share details of the
conclusion
- Link both the Linear (Fixes NEXT-xxx) and the GitHub issues
- Add review comments if necessary to explain to the reviewer the logic
behind a change
### How?
Closes NEXT-
Fixes #
-->
### What?
This PR introduces a ground work to generate wasm bindings package from
our napi bindings. This doesn't actually replace anything yet, however
aim to establish our napi bindings package can be built against wasm32
target.
### Why?
We currently have two bindings package to generate native / wasm target
support, one for napi and one other for wasm. Recently napi-rs started
to support to generate bindings for the wasm directly - which means we
can get rid of the wasm-pack based bindings code entirely and maintain a
single bindings code only.
This'll makes our `next-swc` simpler as well, since the invocation to
the bindings now becomes identical we don't have to additional wasm
specific logics to invoke functions (i.e transform, transformsync..).
Also napi generates wasi-supported wasm bindings, provides few more
features to the current wasm bindings.
#### Good
- Async napi binding fn works transparently (`transform`, `minify`...)
- (Experimental) thread supports depends on node.js runtime
- Wasi support: i.e it can even read filesystem directly!
#### Things to consider
- node.js's wasi support is experimental yet
- napi-rs's wasm support is in beta yet, specifically `packaging`
generated wasm output.
Due to `things to consider` reasons, this PR does not replace existing
wasm target yet. We should be able to plan out things later.
**What happens to the turbopack api in napi bindings?**
Simply put, this **does not support turbopack in wasm**. Build works by
disabling turbopack (more notably, underlying dependency doesn't support
wasm) features. It is something to explore separately.
Closes PACK-2367
There is a branch at https://github.com/vercel/next.js/pull/61586 shows
quick demo for importing, running sync / async / read external files.
### What?
This PR wraps up supporting rsc transforms (mostly for the assertion) in
Turbopack. PR contains a few changes to support it, including:
- adjust / expand transform rules for the corresponding contexts
- fix file name / node_modules check
- extract visitors for the assertion / transforms
This change enables most of the rsc-build* tests and some more other
tests. The only failing tests in the rsc-build-errors is due to
Turbopack not triggering hmr with empty file.
Closes PACK-2303
