### What?
fixes
```
[Error: Invalid segment components, catch all segment must be the last segment
Debug info:
- Execution of directory_tree_to_entrypoints_internal failed
- Invalid segment components, catch all segment must be the last segment] {
code: 'GenericFailure'
}
```
Closes WEB-1668
Inferring the protocol from the request meta is not reliable when the next server is running over `http` but sitting behind an https proxy. This instead plumbs the experimental https flag through to the optimizer so we can more reliably determine the protocol
Fixes#55971
### What?
Minor improvement to test fixture to clean up the instance if explicitly specified to continue test. This is required to run turbopack related tests.
Closes WEB-1634
### What?
In some test failures we've been observing test result is not written at
all like
```
Failed to load test output [Error: ENOENT: no such file or directory, open 'test/e2e/app-dir/edge-runtime-node-compatibility/edge-runtime-node-compatibility.test.ts.results.json'] {
errno: -2,
code: 'ENOENT',
syscall: 'open',
path: 'test/e2e/app-dir/edge-runtime-node-compatibility/edge-runtime-node-compatibility.test.ts.results.json'
}
```
scrolling up, it was due to whole test process was taken down by calling
process.exit explicitly.
We want to collect test results for the failures still, so the PR amends
it for the cases if it's specified to continue on error.
Closes WEB-1628
When errors are thrown in middleware it could re-send headers for the same response
```
Error [ERR_HTTP_HEADERS_SENT]: Cannot set headers after they are sent to the client
at __node_internal_captureLargerStackTrace (node:internal/errors:490:5)
at new NodeError (node:internal/errors:399:5)
at ServerResponse.setHeader (node:_http_outgoing:645:11)
at origSetHeader (/next.js/packages/next/src/server/base-server.ts:777:16)
at ServerResponse._res.setHeader (/next.js/packages/next/src/server/base-s
erver.ts:777:16)
at setHeader (/next.js/packages/next/src/server/base-http/node.ts:84:15)
at renderErrorImpl (/next.js/packages/next/src/server/base-server.ts:2790:
11)
at <anonymous> (/next.js/packages/next/src/server/base-server.ts:2777:19)
at trace (/next.js/packages/next/src/server/lib/trace/tracer.ts:213:14)
at DevServer.renderError (/next.js/packages/next/src/server/base-server.ts
:2776:24)
at DevServer.renderError (/next.js/packages/next/src/server/next-server.ts
:1299:18)
at DevServer.handleRequestImpl (/next.js/packages/next/src/server/base-ser
ver.ts:1185:23) {
code: 'ERR_HTTP_HEADERS_SENT'
}
```
Migrate middleware-errors test to e2e test to avoid flaky assertion due to duplicated logging collected in integration test.
Closes NEXT-1629
Some tests may depend on `latest` to help us catch problems earlier. This adds support for the `resolutions` field for tests to allow pinning of deps that may be problematic upstream.
## Logging Improvements
* Delay server start logging
Post start logging after request handler is created, so when error
occurred like missing "app" or "pages" directory it won't log start
server message, instead it will only show error message.
* Fix jsconfig hmr case
Previously the `jsconfig.json` is patched too early that didn't trigger
the hmr reload, this PR enables it to show on the
* Adding timestamp for "ready" event
Display a timesmap after "ready" message, so we can monitor how long
does it take, and keep perfing on it
* Polish logging format
* Starts with captital letter
* align the indentation
### What
Found a flaky test like https://github.com/vercel/next.js/actions/runs/6125719281/job/16628276301?pr=55118#step:29:174, `get-port` throws by port is not available. Peeking bit, there seems an upstream fix hope to improve the situation but unfortunately it happened after get-port switched to native esm only, so bumping is non trivial work. Instead adapting get-port-please as a replacwement but leave get-port as fallback for a while to verify its stability. Once we are certain, we can remove old get-port entirely.
### What?
https://vercel.slack.com/archives/C04KC8A53T7/p1694190462958199
I realized we throws an error attempt to destory against undefined instance when `beforeAll` fails in any reason. This is quite redundant error since if next instance doesn't exist, likely there's an upstream test failures already and destory against undefined error is not useful to debug anyway.
PR replaces `nextTestSetup`'s teardown first, for the remaining places calling `next.destory` explicitly will be amended later.
### What?
Switch the default for `--turbo` to the new `--experimental-turbo`, remove the old code in next.js
### Why?
The new approach will be used in future
Closes WEB-1506
While investigating the HMR event types I noticed `pong` is not being used in Pages Router nor in App Router.
This PR removes the code that sends it as it's essentially dead code.
Follow up to https://github.com/vercel/next.js/pull/54081 -- this was
restoring the router tree improperly causing an error on bfcache hits
Had to override some default behaviors to prevent `forward` / `back` in
playwright from hanging indefinitely since no load event is firing in
these cases
Fixes#54184
Closes NEXT-1528
When an mpa navigation takes place, we currently push the user to the new route and suspend the page indefinitely (x-ref: #49058). When navigating back, if the browser opts into using the [bfcache](https://web.dev/bfcache/), it will remain suspended and `pushRef.mpaNavigation` will be true. This means that anything that would cause the component to re-render will trigger the mpa navigation again (such as hovering over another `Link`, as reported in #53347)
This PR checks to see if bfcache is being used by observing `PageTransitionEvent.persisted` and if so, resets the router state to clear out `pushRef`.
Closes NEXT-1511
Fixes#53347
### What?
This PR makes it easier to use Next.js with IPv6 hostnames such as `::1` and `::`.
### How?
It does so by removing rewrites from `localhost` to `127.0.0.1` introduced in #52492. It also fixes the issue where Next.js tries to fetch something like `http://::1:3000` when `--hostname` is `::1` as it is not a valid URL (browsers' `URL` class throws an error when constructed with such hosts). It also fixes `NextURL` so that it doesn't accept `http://::1:3000` but refuse `http://[::1]:3000`. It also changes `next/src/server/lib/setup-server-worker.ts` so that it uses the server's `address` method to retrieve the host instead of our provided `opts.hostname`, ensuring that no matter what `opts.hostname` is we will always get the correct one.
### Note
I've verified that `next dev`, `next start` and `node .next/standalone/server.js` work with IPv6 hostnames (such as `::` and `::1`), IPv4 hostnames (such as `127.0.0.1`, `0.0.0.0`) and `localhost` - and with any of these hostnames fetching to `localhost` also works. Server Actions and middleware have no problems as well.
This also removes `.next/standalone/server.js`'s logging as we now use `start-server`'s logging to avoid duplicates. `start-server`'s logging has also been updated to report the actual hostname.
The above pictures also demonstrate using Server Actions with Next.js after this PR.
Fixes#53171Fixes#49578
Closes NEXT-1510
Co-authored-by: Tim Neutkens <6324199+timneutkens@users.noreply.github.com>
Co-authored-by: Zack Tanner <1939140+ztanner@users.noreply.github.com>
## Vendoring
Updates all module resolvers (node, webpack, nft for entrypoints, and nft for next-server) to consider whether vendored packages are suitable for a given resolve request and resolves them in an import semantics preserving way.
### Problem
Prior to the proposed change, vendoring has been accomplished but aliasing module requests from one specifier to a different specifier. For instance if we are using the built-in react packages for a build/runtime we might replace `require('react')` with `require('next/dist/compiled/react')`.
However this aliasing introduces a subtle bug. The React package has an export map that considers the condition `react-server` and when you require/import `'react'` the conditions should be considered and the underlying implementation of react may differ from one environment to another. In particular if you are resolving with the `react-server` condition you will be resolving the `react.shared-subset.js` implementation of React. This aliasing however breaks these semantics because it turns a bare specifier resolution of `react` with path `'.'` into a resolution with bare specifier `next` with path `'/dist/compiled/react'`. Module resolvers consider export maps of the package being imported from but in the case of `next` there is no consideration for the condition `react-server` and this resolution ends up pulling in the `index.js` implementation inside the React package by doing a simple path resolution to that package folder.
To work around this bug there is a prevalence of encoding the "right" resolution into the import itself. We for instance directly alias `react` to `next/dist/compiled/react/react.shared-subset.js` in certain cases. Other times we directly specify the runtime variant for instance `react-server-dom-webpack/server.edge` rather than `react-server-dom-wegbpack/server`, bypassing the export map altogether by selecting the runtime specific variant. However some code is meant to run in more than one runtime, for instance anything that is part of the client bundle which executes on the server during SSR and in the browser. There are workaround like using `require` conditionally or `import(...)` dynamically but these all have consequences for bundling and treeshaking and they still require careful consideration of the environment you are running in and which variant needs to load.
The result is that there is a large amount of manual pinning of aliases and additional complexity in the code and an inability to trust the package to specify the right resolution potentially causing conflicts in future versions as packages are updated.
It should be noted that aliasing is not in and of itself problematic when we are trying to implement a sort of lightweight forking based on build or runtime conditions. We have good examples of this for instance with the `next/head` package which within App Router should export a noop function. The problem is when we are trying to vendor an entire package and have the package behave semantically the same as if you had installed it yourself via node_modules
### Solution
The fix is seemingly straight forward. We need to stop aliasing these module specifiers and instead customize the resolution process to resolve from a location that will contain the desired vendored packages. We can then start simplifying our imports to use top level package resources and generally and let import conditions control the process of providing the right variant in the right context.
It should be said that vendoring is conditional. Currently we only vendor react pacakges for App Router runtimes. The implementation needs to be able to conditionally determine where a package resolves based on whether we're in an App Router context vs a Page Router one.
Additionally the implementation needs to support alternate packages such as supporting the experimental channel for React when using features that require this version.
### Implementation
The first step is to put the vendored packages inside a node_modules folder. This is essential to the correct resolving of packages by most tools that implement module resolution. For packages that are meant to be vendored, meaning whole package substitution we move the from `next/(src|dist)/compiled/...` to `next/(src|dist)/vendored/node_modules`. The purpose of this move is to clarify that vendored packages operate with a different implementation. This initial PR moves the react dependencies for App Router and `client-only` and `server-only` packages into this folder. In the future we can decide which other precompiled dependencies are best implemented as vendored packages and move them over.
It should be noted that because of our use of `JestWorker` we can get warnings for duplicate package names so we modify the vendored pacakges for react adding either `-vendored` or `-experimental-vendored` depending on which release channel the package came from. While this will require us to alter the request string for a module specifier it will still be treating the react package as the bare specifier and thus use the export map as required.
#### module resolvers
The next thing we need to do is have all systems that do module resolution implement an custom module resolution step. There are five different resolvers that need to be considered
##### node runtime
Updated the require-hook to resolve from the vendored directory without rewriting the request string to alter which package is identified in the bare specifier. For react packages we only do this vendoring if the `process.env.__NEXT_PRIVATE_PREBUNDLED_REACT` envvar is set indicating the runtime is server App Router builds. If we need a single node runtime to be able to conditionally resolve to both vendored and non vendored versions we will need to combine this with aliasing and encode whether the request is for the vendored version in the request string. Our current architecture does not require this though so we will just rely on the envvar for now
##### webpack runtime
Removed all aliases configured for react packages. Rely on the node-runtime to properly alias external react dependencies. Add a resolver plugin `NextAppResolverPlugin` to preempt perform resolution from the context of the vendored directory when encountering a vendored eligible package.
##### turbopack runtime
updated the aliasing rules for react packages to resolve from the vendored directory when in an App Router context. This implementation is all essentially config b/c the capability of doing the resolve from any position (i.e. the vendored directory) already exists
##### nft entrypoints runtime
track chunks to trace for App Router separate from Pages Router. For the trace for App Router chunks use a custom resolve hook in nft which performs the resolution from the vendored directory when appropriate.
##### nft next-server runtime
The current implementation for next-server traces both node_modules and vendored version of packages so all versions are included. This is necessary because the next server can run in either context (App vs Page router) and may depend on any possible variants. We could in theory make two traces rather than a combined one but this will require additional downstream changes so for now it is the most conservative thing to do and is correct
Once we have the correct resolution semantics for all resolvers we can start to remove instances targeting our precompiled instances for instance making `import ... from "next/dist/compiled/react-server-dom-webpack/client"` and replacing with `import ... from "react-server-dom-webpack/client"`
We can also stop requiring runtime specific variants like `import ... from "react-server-dom-webpack/client.edge"` replacing it with the generic export `"react-server-dom-webpack/client"`
There are still two special case aliases related to react
1. In profiling mode (browser only) we rewrite `react-dom` to `react-dom/profiling` and `scheduler/tracing` to `scheduler/tracing-profiling`. This can be moved to using export maps and conditions once react publishses updates that implement this on the package side.
2. When resolving `react-dom` on the server we rewrite this to `react-dom/server-rendering-stub`. This is to avoid loading the entire react-dom client bundle on the server when most of it goes unused. In the next major react will update this top level export to only contain the parts that are usable in any runtime and this alias can be dropped entirely
There are two non-react packages currently be vendored that I have maintained but think we ought to discuss the validity of vendoring. The `client-only` and `server-only` packages are vendored so you can use them without having to remember to install them into your project. This is convenient but does perhaps become surprising if you don't realize what is happening. We should consider not doing this but we can make that decision in another discussion/PR.
#### Webpack Layers
One of the things our webpack config implements for App Router is layers which allow us to have separate instances of packages for the server components graph and the client (ssr) graph. The way we were managing layer selection was a but arbitrary so in addition to the other webpack changes the way you cause a file to always end up in a specific layer is to end it with `.serverlayer`, `.clientlayer` or `.sharedlayer`. These act as layer portals so something in the server layer can import `foo.clientlayer` and that module will in fact be bundled in the client layer.
#### Packaging Changes
Most package managers are fine with this resolution redirect however yarn berry (yarn 2+ with PnP) will not resolve packages that are not defined in a package.json as a dependency. This was not a problem with the prior strategy because it was never resolving these vendored packages it was always resolving the next package and then just pointing to a file within it that happened to be from react or a related package.
To get around this issue vendored packages are both committed in src and packed as a tgz file. Then in the next package.json we define these vendored packages as `optionalDependency` pointing to these tarballs. For yarn PnP these packed versions will get used and resolved rather than the locally commited src files. For other package managers the optional dependencies may or may not get installed but the resolution will still resolve to the checked in src files. This isn't a particularly satisfying implemenation and if pnpm were to be updated to have consistent behavior installing from tarballs we could actually move the vendoring entirely to dependencies and simplify our resolvers a fair bit. But this will require an upstream chagne in pnpm and would take time to propogate in the community since many use older versions
#### Upstream Changes
As part of this work I landed some other changes upstream that were necessary. One was to make our packing use `npm` to match our publishing step. This also allows us to pack `node_modules` folders which is normally not supported but is possible if you define the folder in the package.json's files property.
See: #52563
Additionally nft did not provide a way to use the internal resolver if you were going to use the resolve hook so that is now exposed
See: https://github.com/vercel/nft/pull/354
#### additional PR trivia
* When we prepare to make an isolated next install for integration tests we exclude node_modules by default so we have a special case to allow `/vendored/node_modules`
* The webpack module rules were refactored to be a little easier to reason about and while they do work as is it would be better for some of them to be wrapped in a `oneOf` rule however there is a bug in our css loader implementation that causes these oneOf rules to get deleted. We should fix this up in a followup to make the rules a little more robuts.
## Edits
* I removed `.sharedlayer` since this concept is leaky (not really related to the client/server boundary split) and it is getting refactored anyway soon into a precompiled runtime.
### What?
* fixes problems in Next.rs API introduced by #52846
* adds test infrastructure for experimental turbo testing
* adds two test cases to verify the infrastructure
* add grouping of output logs in run-tests
* simplify template loading
### Why?
### How?
### Why
In #52985 the not found solution introduces `NODE_ENV` to determine if it his the not found boundary and should render the not found, as in the next build mode, we have `/_not-found` as a special route which has a empty parallel route, but in next dev mode so far it his the `parallel-default-route`. This could dependend on the `NODE_ENV` passing to next server but not necessarily.
### What
Fixes#53082Fixes#53083
### How
When server actions `not-found` hits, now we create a new loader tree based on the previous one, including `layout` and other components but not the children parallel routes
For production case, to make the rendering independent from the `NODE_ENV`, we're using original pathname to check if it's `/_not-found` to determine if it's production build 404 page
To support replace the loader tree of action, did a little refactor that passing down the loader tree from top level to `bodyResult`. Then we can change the loader tree itself before rendering, in short, we tweak it from original tree to one for not-found case, so server actions could render it properly
This breaks out routing handling from `next-server`, `next-dev-server`,
and `base-server` so that these are only handling the "render" work and
eventually these will be deleted completely in favor of the bundling
work being done.
The `router` process and separate `render` processes are still
maintained here although will be investigated further in follow-up to
see if we can reduce the need for these.
We are also changing the `require-cache` IPC to a single call instead of
call per entry to reduce overhead and also de-dupes handling for
starting the server between the standalone server and normal server.
To maintain support for existing turbopack route resolving this
implements the new route resolving in place of the existing
`route-resolver` until the new nextturbo API is fully landed.
After these initial changes we should continue to eliminate non-render
related code from `next-server`, `base-server`, and `next-dev-server`.
When conflicted pages occur between app and pages server used to throw error and you need to solve the conflicts and restart the server.
This PR capture the error during files aggregation, and send to client to display the error for files confliction. This will send all the conflicts to client and it will still error until you solve all of them. But since the server is not stuck by errors, client can recover once the error is solved.
Closes NEXT-1283
Continuing on changes to move the rendering logic into the bundles.
- Unifies edge render functions: `appRenderToHTML` and `pagesRenderToHTML` becomes `renderToHTML`
- When an error occurs, the error module's match is used so the module's internal render can be used (easing transition away from using the server's render method)
- Improved test resiliance
You'll probably want to disable whitespace in the diff
## Description
This allows for better editor support by using `describe` or functions called `describe` with the same syntax instead of custom names.
Changes:
- `nextTestSetup` can be used instead of `createNextDescribe` keeping the same behaviour but being called inside a `describe` "block" (not applied everywhere)
- `getSnapshotTestDescribe` replaced with a custom `describe.each`
- `sandbox` helper function for `acceptance`/`acceptance-app` merged into a single shared one
- `outdent` to remove the indent from inline files in tests which helps with consistent snapshots
### What?
this forces all tests to use turbopack independent of the way they invoke next dev
### Why?
some tests were not running turbopack
fixes WEB-1187
### What?
This test case was never passing and accidentally enabled for Turbopack.
We could disable the whole test suite, but since only one test case is
affected we can also disable only that one.
This adds new `build and test` and `build and deploy` workflows in favor
of the existing massive `build, test, and deploy` workflow. Since the
new workflows will use `pull_request_target` this waits to remove the
existing workflow until the new one is tested.
While testing this new workflow flakey behavior in tests have also been
addressed. Along with the new workflow we will also be leveraging new
runners which allow us to run tests against the production binary of
`next-swc` so this avoids slight differences in tests we've seen due to
running against the dev binary.
Furthermore we will have a new flow for allowing workflow runs on PRs
from external forks which will either require a comment be checking a
box approving the run after each change or a label added by the team.
The new flow also no longer relies on `actions/cache` or similar which
have proven to be pretty unreliable.
Tests runs with the new workflow can be seen here
https://github.com/vercel/next.js/actions/runs/5100673508/jobs/9169416949
metadataBase is using `process.env.PORT` to construct a host when there's no `metadataBase` specified in layout. Dev server needs to pass down the PORT env from the parent prcoess.
Fixes#49807Fixes#49859Closes#49889
This uses the new built-in progressive enhancement features of React.
These always use `multipart/form-data` atm. When one comes in that's not
a fetch, we can use `decodeAction` to get a resolved function.
This also ensures that we can test this by passing disableJavaScript to
tests. This disables JS for the context.
This PR implements preloading of CSS from RSC.
1. The underlying Flight protocol was extended in
https://github.com/facebook/react/pull/26502 to allow sending hints from
RSC to SSR and Client runtimes. React was updated to include these
changes.
2. We now call `ReactDOM.preload()` for each stylesheet used in a
layout/page layer
There are a few implementation details to take note of
1. we were previously using the `.browser` variant of a few React
packages. This was a holdover from when there was just browser and node
and we wanted to use the browser variant b/c we wanted the same code to
work in edge/node runtimes. React now publishes a `.edge` variant which
is like `.browser` but expects to be server only. This is necessary to
get the opt-in for `AsyncLocalStorage`.
2. Even with the above change, AsyncLocalStorage was not patched on the
global scope until after React was loaded. I moved this into a module
which is loaded first
3. The component passed to RSC's `renderToReadableStream` is not
actually part of the RSC module graph. If I tried to call
`ReactDOM.preload()` inside that function or any other function defined
inside `app-render.tsx` file it would actually see the wrong instance of
`react-dom`. I added a new export on the RSC top level export which
exposes a `preloadStyle(...)` function which just delegates to
`ReactDOM.preload(...)`. This makes the preload run in the right module
graph
~There are a couple of bugs in React that this work uncovered that I
will upstream. We may want to delay merging until they are addressed.
I'll update this comment when that is complete.~
1. ~React, during SSR, can emit a preload for a style twice in some
circumstances because late discovered stylesheets don't consider whether
a preload has already been flushed when preparing to reveal a boundary
they are within~
2. ~React, during RSC updates on the client, can preload a style that is
already in the document because it currently only looks for existing
preload links and does not consider if there is a stylesheet link with
the same href.~
~both of these issues will not break functionality, they just make the
network tab look at bit more noisy. We would expect network deduping to
prevent multiple actual loads~
The above React bugs were fixed and included now in the React update in
this PR
---------
Co-authored-by: Shu Ding <g@shud.in>
